recommended mounting holes 0.74 [18.8mm] 0.472 [12.0mm] 0.81 [20.6mm] 0.18 [4.6mm] typ. 0.475 [12.1mm] ?.040 [?1.0mm] 0.09 [2.3mm] 0.16 [4.0mm] 0.100 [2.5mm] 0.740 [18.8mm] 0.162 [4.1mm] 0.104 [2.6mm] ?.040 +.003 -.002 lightpipe faces 0.235 [6.0mm] 0.092 [2.3mm] 0.118 [3.0mm] 0.218 [5.5mm] 0.100 [2.5mm] 0.11 [2.8mm] ( unless otherwise specified ) SLP-2 cage code : 32559 4 thomas, irvine, ca. 92618 tel: (949) 951-8808 fax: (949) 951-3974 cad generated document, do not measure drawing. date: checked: 09/11/03 d. green 09/11/03 date: michael chen decimals .x .1 designed: .xx .01 .xxx .005 light pipe, 90 surface mount part no: title: angular x 1 1 1 sheet # of e revision: standard tolerance a engineering update w/o changes e rev. description m. c. approved 03/09/04 date sam yang corporation polycarbonate 3025n2 clear. 2. material: polycarbonate, 94v-0, clear. bivar material code 47-cr. 1. general specifications: bivar molded component specification bv00-e101.
|